PSC GUIDE-IT™ HAND SAFETY TOOL
PSC Guide-it™ Hand Safety Tool is a simple easy-to-use Hand-Safety Tool to keep hands and feet away from pinch and crush injuries when guiding suspended loads. A robust fiberglass pole with a nylon head allows personnel to push and guide suspended loads to their final place, without taking them too close to the load to avoid caught-between struck-by hazards.
This push pull pole assists in “Hands-Free” Guiding, spotting, and landing suspended loads, maneuvering drill pipe and all types of tubular on pipe racks or on the platform, snagging taglines and sling legs, etc.
PSC Guide-It™ Hand Safety Tool assists personnel to maneuver and guide suspended loads while avoiding pinch points and crush points. With the use of these tools, workers do not place themselves in danger by working in unsafe proximity to hazardous suspended loads.
KEY FEATURES
- Lightweight (less than 2 kgs), equipped with an ergonomic non- slip D handle.
- Material - robust fiberglass pole with a nylon head
- Tested to 200 kgs Push & 100 kgs Pull Loads
Available in 4 sizes – 42″, 50″, 72″, & 96″ with a convenient to-hold D Handle and hand stopper, these tools weigh less than 2 kilograms but are rated to push almost 200 kgs & pull 100 kgs of slung load. Use length for greater leverage of smaller slung loads.
PART NUMBERS:
- # PSC-GIT-42
- # PSC-GIT-50
- # PSC-GIT-72
- # PSC-GIT-96
APPLICATION
- Push loads to make them rest in final position
- Pull slung loads for guiding them into position
- Retrieve taglines Maneuver drill pipes, tubulars and other suspended loads.
Remember these poles are for pushing and pulling in place of your hands and arms, they are not crowbars for prying. It is recommended that an employee is completely under control and balanced when operating the tool to guide the suspended load. Please check the tools periodically for any damage during operations, if found, discard the tool.