01
Pinch & Crush Exposure
Hands positioned around load corners or landing areas may become trapped if a suspended load moves during final positioning.
PSC-LG Series · Hands-Free Load Control
PSC LoadGuider® Push Pull Tool for Suspended Loads
A heavy-duty hands-free push pull tool engineered to guide, position and stabilise suspended loads, drill pipes, tubulars and slung industrial equipment while reducing the need for direct hand-to-load contact.
Hands Off.
Guide the load using the tool.
Push Pull Tool for Suspended Loads
Hands-free suspended load control.
PSC LoadGuider® is an industrial push pull tool designed to help operators push, pull, guide and stabilise suspended loads without placing their hands directly on the load.
During final positioning, workers may otherwise be exposed to load corners, pinch points, rigging frames and the potential swing path of the suspended load. LoadGuider® creates a controlled working interface between the operator and the load.
The tool combines a fiberglass body with a durable nylon engagement head, ergonomic non-slip D-handle and integrated hand guard. Its high- visibility lime-green finish helps the tool remain visually identifiable in demanding industrial environments.
LoadGuider® has a tested push rating of 300 kg and a tested pull rating of 150 kg. Five standard lengths allow users to select the reach and working distance suited to the load and operating area.
300
kg tested push rating
150
kg tested pull rating
5
standard tool lengths
1
head for push & pull control
Why Use a Push Pull Tool?
Why use a push pull tool for suspended load positioning?
A push pull safety tool changes where the worker applies control by putting a purpose-built tool between the operator and the suspended load.
02
Line-of-Fire Exposure
Direct hand contact around rigging hardware, frames and structural members can place workers close to potential load movement.
03
Load Swing Zone
Workers positioned close to a moving suspended load during descent and placement can be exposed to impact and crush hazards.
04
Controlled Working Buffer
Push and pull forces can be transferred through LoadGuider® rather than through direct hand contact with the suspended load.
Engineering & Design
PSC LoadGuider® push pull tool features
01
Durable Nylon Engagement Head
Designed to engage suitable load corners, rigging frames, structural profiles, drill pipes and taglines during controlled push and pull operations.
02
High-Strength Fiberglass Body
The fiberglass shaft provides rigidity for controlled industrial positioning while remaining suitable for extended use.
03
Ergonomic Non-Slip D-Handle
Provides a secure grip during push and pull manoeuvres, including use with industrial gloves in demanding conditions.
04
Integrated Hand Guard
Helps prevent the operator's hand from sliding toward the engagement area during forceful push or pull operations.
05
High-Visibility Lime-Green Finish
High-contrast shaft colour supports visual identification on decks and in busy industrial work areas.
06
Industrial Environmental Resistance
Intended for offshore, onshore, heavy industrial and drilling environments, with resistance to corrosion, drilling fluids and wash-down.
Push Pull Tool Sizes
PSC LoadGuider® sizes and part numbers
Select the LoadGuider® length according to lift height, load dimensions, deck geometry, available operating space and required working distance.
21"
PSC-LG-21
42"
PSC-LG-42
50"
PSC-LG-50
72"
PSC-LG-72
96"
PSC-LG-96
Industrial Applications
Push pull tool applications for suspended load control
Application 01
Suspended Load Positioning
Use LoadGuider® during suitable final positioning tasks to guide and stabilise suspended industrial loads while maintaining separation between the operator and the load.
- Guide slung loads during final approach.
- Position cargo baskets, containers and equipment modules during crane landing.
- Stabilise suspended loads during final descent.
Application 02
Drill Pipe & Tubular Handling
LoadGuider® can assist with controlled positioning of drill pipes, tubulars and related equipment where direct manual guidance would place workers close to pinch and crush areas.
- Manoeuvre drill pipes and tubulars during crane-assisted pick and lay-down.
- Guide tubular strings through restricted deck and pipe-rack areas.
- Assist positioning of related subsea and wellhead equipment.
Application 03
Tagline & Rigging Operations
The engagement head can assist with hooking, retrieving or redirecting suitable taglines while helping the operator maintain distance from the suspended load.
- Hook and retrieve taglines after landing.
- Assist suitable tagline positioning tasks.
- Support general load guidance in fabrication yards, ports and construction environments.
Hands-Free Load Positioning
Push pull tool vs direct hand guidance
LoadGuider® provides a purpose-built physical interface for suitable positioning tasks instead of requiring workers to apply control directly with their hands.
| Control Factor | PSC LoadGuider® | Direct Hand Guidance |
|---|---|---|
| Hand-to-load contact | Tool provides the contact point during suitable push, pull and guidance tasks. | Worker directly touches the load. |
| Working distance | Determined by selected tool length and operating position. | Worker must remain close enough to physically reach the load. |
| Push control | Applied through the tool. | Applied directly by hand or body. |
| Pull guidance | Applied through the tool. | Requires direct load contact. |
| Primary purpose | Guiding, positioning and stabilising. | Manual physical load guidance. |
Technical Data
PSC LoadGuider® push pull tool specifications
| Product | PSC LoadGuider® Push/Pull Tool |
|---|---|
| Series | PSC-LG Series |
| Body Material | Fiberglass |
| Head Material | Nylon |
| Push Rating | 300 kg |
| Pull Rating | 150 kg |
| Handle Type | Ergonomic non-slip D-handle |
| Hand Guard | Integrated |
| Finish | High-visibility lime green |
| Available Lengths | 21", 42", 50", 72", 96" |
| Part Numbers | PSC-LG-21, PSC-LG-42, PSC-LG-50, PSC-LG-72, PSC-LG-96 |
| Environment | Offshore, onshore, heavy industrial, drilling |
| Resistance | Corrosion, drilling fluids, wash-down |
Safe Use
Safe use of a push pull tool for suspended loads
PSC LoadGuider® is a positioning and guidance aid. Proper lifting procedures, approved rigging practices and site controls remain necessary.
Use During Final Approach
Use during suitable final descent and placement tasks rather than during crane hoist or long-travel movement.
Maintain Working Distance
Do not close the intended gap between the operator and the load while using the tool.
Use in Pairs Where Appropriate
One LoadGuider® on each side of the load can provide coordinated two-sided guidance during suitable positioning tasks.
Complement Approved Taglines
LoadGuider® can be used alongside approved taglines. It is not intended to replace them.
Select the Correct Length
Match the length to lift height, load configuration, operating space and required working distance.
Guide and Stabilise
Use LoadGuider® for its intended push, pull, guidance and positioning functions.
Not Rated for Lifting
PSC LoadGuider® is not rated for load bearing, lifting, prying or levering. It is intended for guiding and stabilising suspended loads.
Industrial Applications
Industries using push pull safety tools
01
Offshore Drilling Rigs
02
Oil & Gas Production Platforms
03
Offshore Supply & Support Vessels
04
Shipyards & Marine Construction
05
Fabrication Yards
06
Ports & Cargo Operations
07
Structural Steel & Construction
08
Industrial Maintenance & Shutdowns
Push Pull Tool FAQs
Frequently asked questions about PSC LoadGuider®
What is a push pull tool used for?
A push pull tool allows an operator to apply
controlled pushing, pulling, guiding and
stabilising force to suitable suspended loads
without requiring direct hand contact with
the load.
What is the PSC LoadGuider® push rating?
PSC LoadGuider® has a tested push rating
of 300 kg.
What is the PSC LoadGuider® pull rating?
PSC LoadGuider® has a tested pull rating
of 150 kg.
What lengths are available?
PSC LoadGuider® is available in 21", 42",
50", 72" and 96" versions.
Can LoadGuider® be used for drill pipe handling?
LoadGuider® can support controlled positioning
of drill pipes, tubulars and related equipment
during suitable crane-assisted handling tasks.
Does LoadGuider® replace a tagline?
No. LoadGuider® may complement approved
taglines but is not intended to replace them.
Can LoadGuider® be used for lifting or prying?
No. PSC LoadGuider® is not rated for lifting,
load bearing, prying or levering. It is intended
for guiding and stabilising suspended loads.
Need the right LoadGuider® for your suspended-load operation?
Talk to PSC
Select the right LoadGuider® configuration.
Tell us about your suspended-load positioning task, working height, operating environment and required reach. Our team can help identify the appropriate LoadGuider® configuration.