In drilling, rigging, pipe handling, and maintenance operations across Oman, PSC HandsFree replaces manual hand exposure with engineered, hands-free controls — so your crews maintain control without standing in the line of fire.
Oman's upstream, midstream and downstream operations depend on high-energy tasks — suspended loads, tubulars, rotating machinery, valves and pressurised assets. Hand injuries rarely happen because workers ignore procedure; they happen because the task itself requires hands to enter the hazard zone to guide, align or stabilise equipment.
Guiding suspended loads into position
Aligning drill pipes during drilling operations
Positioning casing during installation
Stabilising valves during maintenance
Handling mechanical components during shutdowns
Controlling loads near cranes
Positioning steel structures
Manual intervention during equipment maintenance
Despite strong safety programmes, injuries continue where workers must physically interact with loads, tubulars and machinery.
Guiding, aligning and stabilising pipe under load exposes hands to pinch points and crush hazards.
Precise positioning during installation often places workers within reach of unexpected movement.
Transporting and positioning heavy pipe in confined workspaces increases hand exposure.
Guiding loads by rope, tagline or direct contact creates line-of-fire and crush risk.
Poor access and awkward positioning can force hands near hazardous equipment.
Dismantling and reinstalling equipment exposes crews to pinch points and stored energy.
Crews often stand within dangerous proximity to suspended components during positioning.
Restricted workspaces raise the likelihood of accidental contact with energised equipment.
Gloves protect against cuts and abrasions, but they cannot stop the force of a suspended load, a rotating shaft or a closing pinch point. Whenever a task requires a hand inside the hazard zone, risk rises regardless of glove quality.
This is the Hand-as-Control Problem: during drill pipe handling, tubular installation, casing alignment, rigging, crane-assisted lifting, valve positioning and shutdown work, a worker's hands often become the primary means of controlling a hazardous task — placing them directly in the path of pinch points, crush zones, line-of-fire hazards and dropped objects.
Leading operators are shifting the objective from protecting the hand to removing it from the hazard whenever practical — through engineering controls rather than behaviour alone.
The Hierarchy of Controls recognises engineering controls as one of the most effective ways to reduce risk, because they address the hazard at its source instead of relying on behaviour alone. PSC HandsFree builds tools around this principle.
PSC's solutions are built around specific operations rather than a one-size-fits-all tool.
Guide drill pipe and position casing from a safer distance, improving control during alignment while reducing exposure to pinch points and unexpected movement.
Maintain safer separation from tubulars during transport, lifting and positioning — from fabrication yards to the well site.
Guide suspended loads from a safer position, improving stability and reducing direct contact against unpredictable crane and load dynamics.
Support load positioning and controlled movement while increasing operator distance and reducing pinch point exposure during lifts.
Reduce awkward positioning and direct hand contact during servicing — critical during high-volume shutdown and turnaround periods.
Identifying pinch points, crush hazards, caught-between incidents and dropped objects is the first step toward the right engineering control.
Engineered tools designed around the operational realities of Oman's oil & gas industry.
Guide, position and control loads at a safer working distance — drill pipe handling, positioning, alignment, landing and fabrication work.
Greater control over suspended loads during crane lifts, steel erection, module positioning and offshore operations.
Improve safety when moving, positioning or aligning drill pipe, casing, tubing, structural and process piping.
Perform equipment servicing, component positioning and alignment tasks without placing hands within hazardous areas.
Engineered tagline solutions that improve load guidance, reduce entanglement and increase operator distance during crane operations.
| High-Risk Task | Common Hand Hazard | PSC HandsFree Solution |
|---|---|---|
| Drill Pipe Handling | Pinch points and crush hazards | Push-Pull Tools |
| Casing Installation | Manual alignment | Pipe Handling Solutions |
| Suspended Load Guidance | Line-of-fire hazards | Load Guiding Tools |
| Rigging Operations | Uncontrolled load movement | Tagline & Load Control Systems |
| Mechanical Maintenance | Direct hand contact | Hands-Off Tools |
| Valve Operations | Restricted access | Extended-Reach Maintenance Tools |
| Equipment Positioning | Caught-between hazards | Push-Pull Tools |
| Shutdown Activities | Increased manual intervention | Engineering Controls & Hands-Free Tools |
Reduce manual intervention during drill pipe and casing positioning without slowing operations.
Reduce exposure to pinch points and suspended loads during structural and piping installation.
Perform inspections, valve operation and servicing with reduced direct contact with hazardous equipment.
Standardised hands-free methods improve consistency during compressed, high-volume maintenance periods.
Complete preventive and corrective work while minimising exposure to line-of-fire and pinch point hazards.
Hand safety is a shared responsibility. PSC HandsFree delivers value across the organisation.
We help industrial organisations move beyond traditional hand protection with engineered solutions built on three principles.
Where possible, redesign tasks so workers do not need to place their hands within hazardous zones.
Enable personnel to guide, position and stabilise equipment from safer working distances — without losing precision.
Practical engineering solutions that integrate into existing lifting, maintenance, drilling and material handling procedures.
Engineered devices that help workers lift, guide, position and maintain equipment while reducing direct hand contact with hazardous loads or machinery.
They reduce unnecessary hand exposure during high-risk tasks, helping crews maintain safer distances from pinch points, suspended loads and moving equipment.
No. PPE remains an essential layer of protection. Hands-free tools complement PPE as engineering controls that reduce exposure before PPE is relied upon.
Drill pipe handling, casing installation, pipe handling, suspended load guidance, rigging, valve maintenance, mechanical maintenance, shutdowns and equipment installation.
Engineering controls reduce risk at the source by redesigning how work is performed, making safer practice consistent and less dependent on individual behaviour.
Yes — designed for demanding industrial environments across upstream, midstream, downstream and oilfield service operations throughout Oman.
Partner with PSC HandsFree to build a proactive hand safety programme that prioritises exposure elimination — not just protection after exposure occurs.
Contact Our Safety Experts Today